If necessary, consult a Dell™ Technical Support representative or an experienced radio/television
or EMC technician for additional suggestions.
Information Technology Equipment (ITE), including peripherals, expansion cards, printers,
input/output (I/O) devices, monitors, and so on, that are integrated into or connected to the
system should match the electromagnetic environment classification of the computer system.
A Notice about Shielded Signal Cables: Use only shielded cables for connecting peripherals to
any Dell™ device to reduce the possibility of interference with radio communications services.
Using shielded cables ensures that you maintain the appropriate EMC classification for the intended
environment. For parallel printers, a cable is available from Dell™. If you prefer, you can order a
cable from Dell™ on the World Wide Web at
www.dell.com
.
Dell has determined that this product is a Class B harmonized product. The following sections
provide country-specific EMC/EMI or product safety information.
FCC Notices (U.S. Only)
FCC, Class B
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the manufacturer's instruction manual, may cause interference with radio
and television reception. This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules.
Notice: The FCC regulations provide that changes or modifications not expressly approved by
Dell™ Inc. could void your authority to operate this equipment.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference with radio or television
reception, which can be determined by turning the equipment off and on, you are encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the antenna of the radio/television receiver.
Increase the separation between this equipment and the radio/television receiver.
Plug the equipment into a different outlet so that the equipment and the radio/television
receiver are on different power mains branch circuits.
Consult a representative of Dell™ or an experienced radio/television technician for
additional suggestions.
The following information is provided on the device or devices covered in this document in
compliance with FCC regulations:
Product name: SH-216CB
Company name: TSST / 486,Digital Empire 2, Sin-Dong , Suwon-City, Gyeonggi-Do, Korea
/ 82-31-8006-6004