TL Tank Li er Specifica ons
Cau on:
The TSS Tank Li$er is designed to be used with the listed compressed gas cylinders
only. Using the Tank Li$er to move or li$ any other equipment could result in damage to
equipment or injury to personnel.
Cylinder Size:
9 inches , 16 inches
Height:
52” to 72”
Weight:
250 Pounds LT, 400 Pounds HD
Li$ Height:
32 Inches LT, 45 inches HD
SAFETY SUMMERY
TSS products are engineered and manufactured with safety in mind. It is cri1cal that all prod-
ucts are maintained, and operated correctly. Read and understand all instruc1ons before per-
forming maintenance, or opera1ng.
The following safety precau1ons shall be observed while performing procedures in this manu-
al.
•
“Li tanks only on a flat surface”.
•
It is recommended that 2 personal operate these units together for safety.
•
The Tank Li$er should only be used only with the cylinder size listed in the Specifica1on
Sec1on.
•
The cylinder should have a valve cap in place.
•
The Tank Li$er should only be used to transport cylinders when in the down posi1on.
•
The Tank Li$er should be moved with care. Quick stops, excessive force, and uneven sur-
faces may cause the Tank Li$er to 1p or fall.
•
Make sure that the web li$ing strap is in place on the roller.
•
The Tank Li$er 1res are foam filled and do not need air but the bearings should be greased
annually.
•
Do not over load unit.
Summary of Contents for TSS100-TL
Page 5: ...Notes...
