1.
Introduction
The desktop UHF RFID reader HUR 120 allows solution developers to use
applications that
require desktop reading and writing of EPCglobal UHF Class 1 Gen 2tags. The HUR 120 reader
is controlled by and powered from a host PC or laptop through a USB interface.
2.
Connecting the reader and installing the USB driver
The HUR 120 reader can be connected to a PC or a notebook via a USB interface.
When
connecting the device for the first time, the user has to install
the necessary device drivers to
allow Windows to recognize the reader. The reader emulates a virtual serial port.
The required VCP drivers for Windows-based systems are available on this website:
http://www.ftdichip.com/Drivers/VCP.htm
A detailed driver installation guide is available on this website:
http://www.ftdichip.com/Support/Documents/InstallGuides.htm
3.
Functionality test
The user can easily test the basic functionalities of the reader with the TSSTagger demo
software. Chapter 5 of this guide contains more information on TSSTagger.
