P a g e
|
6
PAM1 MK2
User Handbook Issue 1
1.0
Introduction
The PAM1 is a 1RU x 280mm deep Audio Monitoring Unit (AMU) with two LCD displays for audio
level measurement, video confidence and metadata status indication.
PAM1 has been designed in conjunction with some of the worlds leading broadcasters to produce
arguably the most comprehensive, intuitive and feature packed product of its type.
As with any new product which relies on complex software, it is possible that you may find minor
bugs or perhaps think of enhancements which would improve the operation of PAM1. In the event
of either scenario, please feel free to contact TSL via your local reseller or directly on +44 1628-
676221, asking for the PAM Product Manager.
TSL will be releasing upgrades and feature enhancements from time to time
– as a purchaser of a
PAM1 product you can receive these free of charge through your reseller or directly from TSL.
Please refer to
PAM1 MK2 is available in Dolby decoding and non-Dolby versions.
The following features are standard:
Dual auto-sensing, 1080p (60, 59, 94 and 50Hz), HD/SDI video inputs
De-embedded audio monitoring from video (HD/SDI) with intuitive selection from up to sixteen
channels (four groups)
4 AES (4 Pairs/8 Channel) Inputs
– 110 Ohm Balanced or 75 Ohm unbalanced via optional CAB-
D25-BNC cable
2 Analogue Stereo Inputs
Ethernet for Network connectivity (future use)
USB connector for system updates and preset save/recall
SD card slot for system updates and preset save/recall
‘Scroll To Hear’ – top level bargraph navigation using rotary encoder
Downmix of discreet multichannel audio to stereo for compatibility monitoring
Multichannel audio outputs for external stereo or 5.1 loudspeaker system integration
ITU BS1770/71 loudness measurement and Histogram
User Programmable ‘Assign Matrix’
Audio Output Delay
Automatic mode switching
– depending on signal type
Dolby E, Dolby Digital and Dolby Digital Plus decoding from HD.SDI and AES signal sources
Lt Rt and Lo Ro Downmixing of Dolby Signals
Hi Resolution Video confidence monitoring
Re-clocked HD/SDI with down converted SDI or composite (PAL.NTSC) video outputs selected
via rear panel Config. Switch.
Dual high resolution LCD screens for 16 bargraphs, setup and metadata display.
Choice of user selectable bargraph scales (BBC PPM, EBU PPM, EBU Digital, Nordic, VU and
DIN)
User programmable presets. 5 Hotkeys by hardware buttons, GPI and 24 internal, accessible by
high level menu selection
Fixed or variable analogue multichannel outputs (8 mono)
Fixed or variable AES multichannel outputs (4 pairs/8 Channels)
Variable stereo analogue outputs
High quality internal full range loudspeaker system
Dual 12V DC inputs
Serial remote control
Headphone output with LS muting
Compact, lightweight (3.1Kg) 1RU case, 280mm deep
The PAM1 MK2 represents the natural evolution of the award winning PAM1 3G audio monitoring
family. In purchasing the PAM1 MK2 you are investing in a solution which will evolve to meet your
needs at no further cost to you the owner. As part of TSL company policy, software updates for
the product will be free charge for the life of the unit (subject to conditions) and will unlock new
features and improve existing ones.
