51
Enter PTZ address to perform parameters setting
Operation instructions, please refer to “3.3.1 PTZ (1) Video monitor test”
.
The PTZ address in the tester must be consistent with the dome camera or decoder, then the
IPC tester can test. After setting the parameter, the tester can control the PTZ and lens.
To control PTZ by screen touch:
Tap left, right, upward and downward on the touch screen to control the PTZ rotation direction, PTZ
cameras will rotate accordingly. By two fingers move outward and inward on the touch screen to
zoom in and out the PTZ.
To control PTZ by key buttons
