9
Note:
1) If the IP camera requires PoE power, then connect the IP c
amera to the IP tester’s
LAN port .
The tester will supply PoE Power for the IP camera. Click on the icon labeled POE to turn the PoE
Power off or on.
2) If use the tester’s menu to turn off the tester’s PoE power supply, the PoE switch and the power
sourc
ing equipment are allowed to connect to the tester’s PSE port, and the PoE power will be
supplied to the IP camera by the tester’s LAN port. On this condition, the tester cannot receive data
from IP camera, but the computer connected to the PoE switch can receive the data via the tester.
Warning:
PoE
switch or PSE power sourcing equipment only can be connected to tester “PSE IN”
port, otherwise will damage the tester.
