installation
:
• Remove your Bloom Boost Bar set from its packaging.
(Do not remove the diode strip protective plastic).
09
10
• Insert the mounting lip into the slit on the
ROI-E720.
• Next carefully place the opposite end in
position and push the locking mechanism into
place until you hear an audible click.
• Repeat the installation process on the
opposite end with the second bar.
• Now secure your bar in place with the included
mounting brackets
• After both bars have been installed connect
them on to each other and finally plug in the
power cord into the ROI-E720 12v plug.
• Locate the Bloom Boost Bar with the smaller mount-
ing lip. This will be installed in between the middle bars
furthest from the dimming knob.
• When installing the bars make sure you go from under the ROI-E720 upwards.
installation
:
• Remove your Bloom Boost Bar set from its packaging.
(Do not remove the diode strip protective plastic).
09
10
• Insert the mounting lip into the slit on the
ROI-E720.
• Next carefully place the opposite end in
position and push the locking mechanism into
place until you hear an audible click.
• Repeat the installation process on the
opposite end with the second bar.
• Now secure your bar in place with the included
mounting brackets
• After both bars have been installed connect
them on to each other and finally plug in the
power cord into the ROI-E720 12v plug.
• Locate the Bloom Boost Bar with the smaller mount-
ing lip. This will be installed in between the middle bars
furthest from the dimming knob.
• When installing the bars make sure you go from under the ROI-E720 upwards.
