3. Alarm functions:
A. To set the Alarm
At alarm mode press and hold “ALM” button for 2 seconds to set hour and minute.
B. To enable/disable alarm function
At alarm mode press “ADJ” button to enable/disable alarm function.
C. At alarm mode, if you don’t press keys within 30 seconds, it will return to the clock display model
automatically.
D. Without interruption, the alarm will go off for 30 seconds, same time the “ ” will flash. To stop the alarm,
press any button.
4.
and display transform
℃
℃
You can change the display of
℃
and
℃
through pressing “ / ”
℃ ℃
button. The unit will change
correspondently when the figure changes.
5. Max/Min temperature and humidity display
A.
Press “MEMORY” once, it displays both the max temperature and humidity from the memory and the icon
“MAX”.
B.
Press “MEMORY” again, it displays both the min temperature and humidity from the memory and the icon
“MIN”.
C.
Press “MEMORY” again, it returns to the current temperature and humidity.
D.
Press “MEMORY” 2seconds, it can clear max/min temperature and humidity.
6. The degree of comfort display
A.
When the temperature is between 20~26 (68~78.8 ), the humidity is between
℃
℃
40%~70%RH. The icon
“ COM” displays, which means it’s comfortable around.
B.
When under any temperature, the humidity is higher than 70%RH, the icon “ WET” displays, which
means it’s too wet around.
C.
When under any temperature, the humidity is lower than 40%RH, the icon “
DRY” displays, which
means it’s too dry around.
D.
When the temperature is lower than 20C (68 ) or higher than 26 (78.8 ), the humidity is between
℃
℃
℃
℃
40%~70%RH, there is no status of comfort displays.
7. Temperature and humidity trend indicators
The temperature-trend and humidity-trend indicators show the trends of collected readings. Arrows indicate a
rising, steady or falling trend.
Arrow
indicator
Temperature trend
Rising
Steady
Falling
Arrow
indicator
Humidity trend
Rising
Steady
Falling
8. Put on the desk
If you’d like to put it on the desk, you can pull out the active nog at the back of the device and put it on the desk.
9. Hang on the wall
If you’d like to hang it on the wall, you do as follows:
A. Put screw into the suitable place on the wall and let the screw out about 3.5mm.
B. Hang the device on the screw.
F) Daily maintenance and particulars noted
1. Keep the device dry. In case it wets, please wipe away the water in no time and dry it. The liquid including
minerals may corrode the circuits inside.
2. Keep it clean on its surface; you can usually clean the surface of the device by the wet cloth. Do not use
chemical reagent, cleanser or strong scour to clean.
3. If you change the circuits by yourself, the product may not work normally.
4. If it displays dismal, maybe the batteries have no charge, and please note the polarity of batteries when
you charge the batteries.
5. When batteries are not in use for a long time, the batteries may leak to corrode the crust or lines. Used
batteries can’t be thrown away; please protect the environment.
Any change of the design and specifications of this product will not be informed in another way.
