Getting Started
Up and Running Overview
2
Getting Started
Up and Running Overview
1.
Make sure the wet bulb wick is clean. Fill reservoir with distilled water.
DO NOT
use
ordinary tap water.
• See “check wick and fill natural wet bulb”.
2.
Place the QUESTempº 34 & 36 in the work area in a safe location approximately 3.5 feet
off the ground.
3.
Power
On
the QUESTempº34 & 36 and
check
the
battery
.
• If the battery voltage displayed during the power-on sequence is less than or equal
to 6.4 volts, replace or recharge the batteries.
4.
Be aware that the sensors require 10 minutes to stabilize to a new environment.
5.
In the main menu, View will be selected (an indicator arrow denotes the selected menu).
Press the
I/O Enter key
to select.
6.
Press the
Run/Stop
key
to begin storing data.
7.
Use the
Up/Down Arrow keys
to set the display to the desired items.
Getting started
