TSI Instruments SIDEPAK SP330, User Manual

Page: 30 / 67

Chapter 3
22
Ready Mode
When the S
IDE
P
AK
™
SP330 and SP350 are first turned on they always go
into Ready Mode. In Ready Mode the display alternates between READY
MODE, ENTER = START and ELAPSED TIME XXXX MIN.
Note If you view a submenu and leave the display in that location, the
SP330 and SP350 “Times Out” and returns to the next higher level
menu after 30 seconds. Eventually, the instrument returns to Ready
Mode, alternating between
READY MODE, ENTER = START
and ELAPSED TIME xxxx MIN. You may also press the PAGE
key at any time to manually escape to the next higher level menu, the
SETUP Menu.
Setup Menu
While in Ready Mode, you can access the Setup Menu by pressing the
PAGE key. Use the ▲▼ keys to select one of the following submenus:
• Flow Setpoint
•
Clear Data
•
Reset All
•
Set Program
•
Run Program
Refer to the corresponding section below for details on each submenu.