![TSI Instruments DICKEY-john INTELLIAG ISO6 Operator'S Manual Download Page 17](http://html1.mh-extra.com/html/tsi-instruments/dickey-john-intelliag-iso6/dickey-john-intelliag-iso6_operators-manual_1178122017.webp)
OPERATO
R’S MANUAL
12 / COMPONENT INSTALLATION
ISO
6
Version 4 UL 2_3 Manual
6011258 Rev C
CAB HARNESSING
(NON ISOBUS READY TRACTORS)
The UT display connects to the tractor cab harness via an
adapter harness. A GPS receiver is required to provide
implement position via CAN or RS232 communication. A row
switch module provides quick access of turning sections on and
off when manual override is required. Ignition wire connects to
switched power source.
A DICKEY-john output module and harness are required for
interfacing with shutoff modules (Tru Count solenoid modules
are not supplied by DICKEY-john). Harnessing structure
illustrated below.
Figure 9
Cab Harness Connections to Universal Terminal