TSI Instruments AIRASSURE 8144, Operation And Maintenance Manual

Page: 15 / 58

5
Chapter 2
Setting Up
The AirAssure
™ Indoor Air Quality Monitor is delivered fully
assembled and ready to be mounted on an interior wall. Start by
unpacking the device and its contents from the shipping package.
The monitor is intended to be connected to local 2.4 GHz Wi-Fi
®
to
access all cloud features, but it can be used without Wi-Fi
®
if needed
as all data is recorded to a pre-installed microSD memory card
accessible from the bottom of the case next to the USB-C port.
A quick start guide is shipped with each instrument. It provides
the necessary steps to configure the Wi-Fi
®
settings for
connecting the device to a local Wi-Fi
®
network and will also
guide you through installation.
N O T I C E
As long as a suitable microSD card is installed, the
AirAssure™
IAQ monitor will store data on the card whether or not the unit is
connected to Wi-Fi
®
. TSI
®
is not liable for corrupt data on the
memory card.
N O T I C E
If connection to the internet is lost, the
AirAssure™ device will
buffer and store data onto its internal memory for approximately
14 days (logged at 15 min. intervals), which will then be uploaded
to the cloud once internet connection has been restored. Data
older than that will be available only on the microSD card.
Currently, customers cannot manually upload microSD card data to
the TSI
®
Cloud. You will be notified on the cloud data if the
AirAssure™ IAQ monitor has trouble writing to the microSD card.
N O T I C E
The monitor does not have the capability to connect to public
Wi-Fi
®
networks that require a second step of browser
authentication, such as a free public hotel or airport network.
A different network will need to be chosen.