background image

 

ii 

INJURIES, OR DAMAGES CONCERNING THE GOODS (INCLUDING CLAIMS 

BASED ON CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR 

OTHERWISE) SHALL BE THE RETURN OF GOODS TO SELLER AND THE 

REFUND OF THE PURCHASE PRICE, OR, AT THE OPTION OF SELLER, THE 

REPAIR OR REPLACEMENT OF THE GOODS. IN THE CASE OF SOFTWARE, 

SELLER WILL REPAIR OR REPLACE DEFECTIVE SOFTWARE OR IF UNABLE TO 

DO SO, WILL REFUND THE PURCHASE PRICE OF THE SOFTWARE. IN NO 

EVENT SHALL SELLER BE LIABLE FOR LOST PROFITS, BUSINESS 

INTERRUPTION, OR ANY SPECIAL, INDIRECT, CONSEQUENTIAL OR 

INCIDENTAL DAMAGES. SELLER SHALL NOT BE RESPONSIBLE FOR 

INSTALLATION, DISMANTLING OR REINSTALLATION COSTS OR CHARGES. No 

Action, regardless of form, may be brought against Seller more than 12 months after a 

cause of action has accrued. The goods returned under warranty to Seller's factory 

shall be at Buyer's risk of loss, and will be returned, if at all, at Seller's risk of loss. 
Buyer and all users are deemed to have accepted this LIMITATION OF WARRANTY 

AND LIABILITY, which contains the complete and exclusive limited warranty of Seller. 

This LIMITATION OF WARRANTY AND LIABILITY may not be amended, modified or 

its terms waived, except by writing signed by an Officer of Seller. 

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for 9565 Series
















































Reviews: