TSI Incorporated DUSTTRAK DRX 8533, Operation And Service Manual

Page: 52 / 85

Chapter 3 42
Connect the External Pump Module to the DustTrak monitor and then try
again. TSI recommends powering down the DustTrak monitor before
connecting the External Pump Module to the DustTrak monitor. Connect the
power cable and the flow tubing between the DustTrak monitor and the
External pump module, as applicable.
While taking a measurement the screen will display the current measured
mass concentration. The various regions of the screen are shown below.
Screen Regions
Mass Fractions
Region (live keys) Shows the size segregated mass
measurements. The highlighted channel
displayed in larger font on the left can be
changed by touching on the screen the
“measurement of most interest” on the right-
hand side of the screen.
Display Mode Region
(live key) The size segregated mass fractions displayed
in this area can be selected by touching in the
“Display” mode region. The modes that can be
selected with this live key are:
All: PM
1
, PM
2.5
, Resp. PM
10
and Total
IAQ-ENV : PM
1
, PM
2.5
PM
10
and Total
IH : Resp, PM
10
and Total
Run Mode Region Shows the run mode selected from the
RunMode screen.
File Name Region Displays the file name to which the data is
currently being saved.
Test Progress Region Shows the time-based progress of the test.
Error Indicators
Mass Fractions Display Mode
Run Mode
File Name
Test Progress