5
Configuration Software
TSI has several software utilities to help you communicate with your
flowmeter to change parameters and to obtain flow data. You can
download the latest versions of these at no charge from our web site:
1. If you only want to change one or more of the operating
parameters shown in Table 3 (above), the easiest way is to use
the software utility called
“TSI setup
.
”
This uses convenient drop-
down menus to help change these parameters. After you have
made your changes, be sure to click on “Send” to store the
changes in the flowmeter’s memory.
2. If you want to communicate directly with the flowmeter using the
basic RS232 commands shown in the
Serial Command Set
Manual
, you can use a terminal program. HyperTerminal is a
common terminal program that is included with most versions of
the Microsoft operating system. You can download a document
from our web site that helps you configure HyperTerminal.
Download the document called
“Using HyperTerminal to
communicate with TSI Flowmeters
.
”
www.
GlobalTestSupply
.com
Find Quality Products Online at: