17
1. Insert a 1” label spindle into a paper roll.
2. Open the printer top.
3. Install a paper roll on the paper roll mount.
4. Feed the paper, printing side face up, through the paper guide and pass over the
platen.
5. Lead the paper through the cutter paper opening.
6. Adjust the paper guide by removing left or right to fit the paper width.
Fig. 27 Label installation in cutter mode
7. Close the top cover by lifting up the top cover support and
close the
top
cover
slowly.
Fig. 28 Complete label installation in cutter mode
Top Cover
Top Cover Support
Paper Guide
Platen
Cutter
