TSC TTP-2410M User Manual Download Page 58

Page: 58 / 79

3.1.4 Ethernet

Use this menu to configure internal Ethernet configuration check the printer’s Ethernet
module status, and reset the Ethernet module. This function is available on the LCD
display when Ethernet card is installed.

Press

and

buttons to select the different options and press

button to enter the option. Press

key to cancel the setting and return to the

previous menu.

Exit

Ethernet

Status

Configure

↓

IP Address

DHCP

↓

MAC

Static IP

↓

Exit

Note:

This function is available for TTP-2410M series only and option for TTP-246M Plus
series.

3.1.4.1 Status: (IP Address / MAC)

Use this menu to check the Ethernet setting status.

3.1.4.1.1 IP Address

Ethernet 1/3

Status

Configure

Exit

The IP address information will be shown on the LCD display. Please press

button to return to the previous menu.

Status 1/3

IP Address

MAC

Exit

IP Address

0.0.0.0

Subnet Mask

0.0.0.0

Gateway

0.0.0.0

Summary of Contents for TTP-2410M
















































































Search results

Summary of Contents for TTP-2410M

Reviews:

Related manuals for TTP-2410M

Brands by name

Popular brands

TSC TTP-2410M, User Manual

Search results

Summary of Contents for TTP-2410M

Reviews:

Related manuals for TTP-2410M

Brands by name

Popular brands