- 10 -
3. Setup
3.1 Setting up the Printer
1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the provided USB cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer, and then plug the
power cord into a properly grounded power outlet.
5. Go to download the driver and labeling software on website if necessary.
www.zenpert.cn
www.zenpert.com
Note:
* Please switch OFF (O) printer power switch prior to plug in the power cord to printer power
jack.
* The interface picture here is for reference only. Please refer to the product specification for
the interfaces availability.
