32
Pitch rod
Flybarless gyro setup-3 Axis gyros
1. Increase pitch slowly until the helicopter comes to a stable hover. Note any seperation
in the rotor blades.
2. Observe the blade tracking:
If main blades are in the same track, then no adjustment required.However,
If one blade appears higher than the another blade, then adjustments must be made.
3. Adjust pitch rod tracking:
A. Main blade is higher → reduce length of linkage rod
B. Main blade is lower → add the length of linkage rod
Precaution during initial setup is for the safety of yourself and others, so
please make sure the heli is flying at least 10m away from any person.
Caution
Caution
Improper tracking will result in vibration, Adjust track until both blades
are tracking in the same plane.
Caution
Pleasa refer to the Flybarless gyro instruction manual for setting up the
cyclic and tail servo along with the rotor head. This will be specific for
each system.
Main blade adjustment
B
A
