17
Starscope on equatorial mount
Instruction manual
Loosen the clamping screw on the pole block
of the mount.
Support the mount/telescope with your other
hand to relieve the pressure on the adjust-
ment screw.
As soon as the desired value is reached (ar-
row marking on the mount), you can tighten
the clamping screw on the pole block.
Turn the adjustment screw to change the tilt
of the mount.
Now set the correct polar height on your
mount. This corresponds to the latitude of
your observation site. The latitude is set at
the polar block.
Adjusting the latitude
