14
Starscope on equatorial mount
Instruction manual
If necessary, loosen the clamping screws of
the mountg axes, turn the axes so that the
two screws or screw holes in the mounting
surface for the tube are horizontal.
The telescope tube has two threaded bolts
for mounting on the mount head.
Place the optical tube on the mount head and
fasten it with the two wing nuts. Tighten the
screws only hand-tight.
When mounting, make sure that the rear end
of the telescope points in the same direction
as the flexible shaft of the declination axis.
Attaching the optical tube to the mount (Starscope 609)
