11
with a power supply from a rechargeable battery).
1 flash means that the charge is close to maximum,
2 flashes – the charge is enough for work, 3 flashes
– you need to change the battery or charge the
rechargeable battery.
The second succession
corresponds to the
amount of the recorder free Flash memory space.
4 flashes mean 0…25% memory is free, 3 flashes
– 25-50%, 2 flashes -50-75%, 1 flash – 75-100%
is free.
When you recorded all you need, stop recording.
When you stop recording, the recorder LED
flashes once, but this flash duration can lasts for
some seconds depending on recorder’s memory
capacity.
After you stop recording, the recorder is in a
stand-by mode. In this mode, the recorder power
consumption is very low so the recorder can
remain without charging (or changing the battery)
for a long period of time (depending on the recorder
model).
If while recording the free memory space ends or
the battery (rechargeable battery) is discharged,
the recorder stops automatically and switches into
stand-by mode.
