Nova Go/Pro/Neo Assembly Instructions
–
Rev K
Page 8
•
Remove the four (4) sliders and replace with the set of
sliders from Hardware Pack.
•
Install the three (3) Screws holding the sliders using the
1/8
”
Hex L-Key from the front of the cover.
•
Put back the cover and install the four (4) screws removed
at step b) using the 1/8”
Hex L-Key from the front of the
cover.
•
Apply the set of felt pads supplied in the hardware pack on
top of the screws.
•
Adjust sliders and install tablet, following the instructions
from Step 3A.