Nova Go/Pro/Neo Assembly Instructions
–
Rev K
Page 21
16.
BUTTERFLY BRACKET INSTALLATION
•
Remove channel cover strip (ref. point 4).
•
Slide inner bracket into outer bracket until the two (2)
screw holes line up.
•
Insert two (2) screws into holes and thread two (2) nuts
onto the two (2) screws but keep loose.
•
Place Z-Nuts into the extrusion channel, move bracket up
or down to desired height.
•
Tighten bracket to extrusion with two (2) screws and two
(2) Z-Nuts.
•
Slide charger onto bracket until firmly in place.
