5
© TrynEx International 2013 (REV B) F50729A
Operating Instructions
Loading Spreader/Operating the Controller
LOADING SPREADER
MATERIAL WEIGHTS
MATERIAL
WEIGHT PER CUBIC FT.
Rock Salt
80-90 lbs.
Calcium Chloride Pellets
75-85 lbs.
Do not overload vehicle. Use the chart below to calculate the weight of spreader and material to comply with Vehicle Weight Ratings.
Empty weight of spreaders:
SD-600
175
lbs.
SD-1400
375
lbs.
Approximate capacity of spreaders:
SD-600
6 cubic feet
SD-1400
14 cubic feet
Approximate weight of full spreaders:
With Rock Salt
SD-600
685
lbs.
SD-1400
1565
lbs.
With Calcium Chloride Pellets
SD-600
655
lbs.
SD-1400
1495
lbs.
Leave the screen in the hopper when loading to prevent chunks and foreign objects from entering the hopper and damaging the spreader.
OPERATING THE CONTROLLER
ON/OFF
Turns Spreader and Control on/off.
BLAST
Turns spreading mechanism to
full speed momentarily.
VIBRATE
Turns Vibrator on/off. Improves
flow and prevents “bridging.”
START/STOP
Turns spreading mechanism on/off.
Use the On/Off button to turn the spreader off between jobs. The Start/Stop pauses spreading, but the vibrator will stay on. Use Start/Stop for
when you need to pause spreading for a short time. Use Blast to momentarily increase the application rate – the spreader will operate at full
speed until the button is released.
www.storksplows.com
