1. Introduction
TRP-C41 is a device for Ethernet extension over fiber, it supports point-to-point and networked
systems. The high fiber bandwidth connections solve problems with electrical noise and different
ground potentials over long transmission lines. TRP-C41 supports 10/100Base-TX transmissions
up to 100 meters and 100Base-FX transmissions up to 60KM. It is the perfect solution for wide
distance connections with high immunity to electrical noise.
1-1.
Features
Wide input range DC power supply.
Plug-and-Play design for the installation within seconds.
Compact and Rugged Metal case capable of withstanding harsh environment.
Data rate: 10/100Mbps auto-negotiation and half-/Full-duplex mode on TX port.
Auto MDI-X/MDI-II for 10/100Base-TX port.
Provides media conversion from UTP to Fiber Optic media types
Supports link fault pass through function.
Supports far end fault function.
LED display to indicate the whole working status.
3 power input types: Direct USB power, external DC adapter and screw terminal.
Support IEEE Standard:
802.3u
100BaseTX & 100BaseFX.
1-2. Specification
Cable: Fiber cable (9/125um).
One 10/100Base-TX auto-negotiation Ethernet RJ-45 port.
One 100Mbps fiber port with Single-mode SC connector.
Built in 128Kb RAM for data buffer.
Wavelength: 1310 nM.
Fiber Power:-15 ~ -8 dBm.
LED indicator: Power and power and TX and fiber link/activity, full/half, 10/100MB.
Distance : 20KM can be up to 60KM (option).
Speed : Auto 10/100MB.
Power Consumption: 12V/160mA.
Power requirement: USB port power or DC input or screw terminal from +10 to 30V.
Operating temperature
：
0 to 50
℃
.
Storage temperature : -20 to 55
℃
.
Humidity: 10-90% Non-condensing.
Dimension: 151mm X 75mm X 26mm.
Weight: 400g.
