background image

ECHIPAMENTE PENTRU AUTOMATIZĂRI

Electric Film S.R.L.  —  Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu

 VÂNZĂRI ▪ 0364 710319 ▪  [email protected] ▪ SUPORT TEHNIC ▪ 0788 250583 

cele mai sensibile

 

3

1. Introduction 

TRP-C38, a compact, 8-port serial device, is designed to instantly convert data from RS232 

interfaces to a 10/100Mbps Ethernet network running at the TCP/IP protocol. By using a 

standard COM port and existing network infrastructure the device allow you to link together serial 

peripherals that are distant from one another from Windows, Linux and Unix without the need to 

install any specific cabling or modify existing software and industry standard DIN rail design 

enables fast and professional installation. 

The TRP-C38 operates in “Direct IP Mode”, “Virtual COM Mode”, and “Paired Mode”. It has two 

synchronous DB-9 serial ports, both equip 10/100 Mbps Ethernet RJ-45 connection. The 

Ethernet port will auto-select 10BaseT or 100BaseTX. TRP-C38 also offers a Heart Beat feature 

to ensure a reliable communicating connection.   

 

1-1. Features 

¾

  Supports RS-232 serial interface   

¾

  In Server mode supports individual client sessions for security.     

¾

  Virtual COM drivers for Windows NT/98/ME/2000/XP 

¾

  Fully compatible with Ethernet and TCP/IP protocol.   

¾

  Supports 10/100 Mbps Ethernet   

¾

  Supported baud rate up to 230.4 Kbps.   

¾

  Power/Link/COMA ~COMH Flow mode LED indicator.   

¾

  Support intranet and internet system setting function.   

¾

  Support screw terminal and standard external DC power adaptor.   

¾

  Power input requirement from DC +10V to +48V.   

 

1-2. Specification. 

z

 

Power Input Voltage: DC +10V to +30V 

z

 

Serial Memory: output: 16K bytes per port 

                                    Input:      8K byte per port 

z

 

LAN: 10/100 Mbps Auto-detecting – 10/100Base T. 

z

 

Serial Interfaces: RS-232 - TX, RX, RTS, CTS, DTR, DSR, DCD, GND 

z

 

Data Rate: 110 bps to 230.4 k bps   

z

 

Parity: none, even, odd, mark, space   

z

 

Data Bits: 5, 6, 7 or 8   

z

 

Stop Bits: 1, 1.5 or 2     

z

 

Protocol: TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP     

z

 Din-Rail 

mountable: 

Yes. 

z

 

Power supply: Screw terminal, or standard external DC adapter. 

z

 

Power consumption: 12V/500 mA.     

z

 

Operating Temperature: 0 to 65 °C.   

z

 

Storage Temperature: -20 to 65 °C.     

z

  Humidity:  0 – 90% Non-Condensing.  

z

 

Approvals: CE, FCC.   

z

 

Dimensions: 120*210*35 mm. 

z

 Weight:638g 

 

 
 
 

Summary of Contents for TRP-C38

































Reviews: