1.
Turn the scale on and wait for the display to zero.
2.
Press and hold the
Z/T
key until the display shows
the current auto-off setting (ie 180), then release.
3.
Press the
M
key to change the auto-off setting
between 180 sec,120 sec, 60 sec, or 0 sec (auto-off
disabled).
4.
Press
to turn the scale off when finished.
Tare Function
The Tare function allows you to subtract the weight of a
container so that the display only shows the weight of the
contents.
Press the
Z/T
key
to subtract the
container’s weight.
Add items to the
container to see their
weight on the display.
Place an empty tray
or container on the
platform.
NOTE:
The weight of the container will subtract from
the available capacity and will leave a negative value
on the display once the weight is removed. Press
Z/T
again to return the display to zero.
Accuracy
Your scale comes calibrated from the factory and most
users wont need to calibrate their scale for a long time.
You should check your scale’s accuracy periodically using
calibration weights and perform calibration if necessary.
NOTE:
Only use trusted calibration weights.
Household items such as bottles and cans with
weights printed on the side are not suitable for
checking accuracy as these values are approximate
and don’t include the container weight (Net Weight).
Radio Frequency
Interference
Unlevel Surfaces
High Humidity
Air Currents
Vibration
Extreme Temps
ON
TARE
CAL
MODE
Radio Frequency
Interference
Unlevel Surfaces
High Humidity
Air Currents
Vibration
Extreme Temps
ON
TARE
CAL
MODE
Summary of Contents for RIOT
Page 1: ...RIOT USER GUIDE ...
