Calibration
Calibration adjustment is permanent and
should only be performed using accurate
calibration weights that match the
requirements for your scale (see the chart on
back). Do not use coins or other household
items to calibrate.
1.
Prepare the required weight for your scale. (see
chart on back)
2.
Find a flat and level surface to perform calibration
and let the scale adjust to room temperature.
3.
Press
ON/TARE
to turn the scale on and wait for
the scale to stabilize.
4.
Press and hold the
CAL/MODE
key until the display
shows ‘CAL’.
5.
Make sure nothing is on the platform then press
CAL/MODE
to confirm the zero point.
6.
The display will then flash the required calibration
weight.
7.
Place the required
calibration weight on the
center of the platform.
8.
The display will show
‘PASS’ then return to
normal weighing mode.
You may now turn the
scale off or continue
weighing.
Radio Frequency
Interference
Unlevel Surfaces
High Humidity
Air Currents
Vibration
Extreme Temps
ON
TARE
CAL
MODE
Radio Frequency
Interference
Unlevel Surfaces
High Humidity
Air Currents
Vibration
Extreme Temps
ON
TARE
CAL
MODE
Radio Frequency
Interference
Unlevel Surfaces
High Humidity
Air Currents
Vibration
Extreme Temps
ON
TARE
CAL
MODE
Summary of Contents for GAUGE
Page 1: ...GAUGE USER GUIDE ...
