6
2.3.2
Attaching the telescopic wand
•
Push the wand onto the hose attachment.
•
Insert the wand into the quick draw attachment
holder positioned on the side of the machine.
3. Controls
•
To turn the vacuum on, push the switch located
on the dust compartment to the (I) position.
•
To turn the vacuum off, push the switch located
on the dust compartment on the (0) position.
4. Operation
4.1
How to change the dust bag
Always operate the vacuum cleaner with a
dust bag installed.
•
Unplug the vacuum cleaner. Remove the used
bag from the bag holder (Fig.2).
•
Attach the new dust bag onto the bag holder
(Fig. 3).
•
Spread out the end of the new dust bag (Fig.
4).
•
Reinsert the tab on the end of the dust cover
into the groove on the dust compartment
housing. Press it into place and fasten the dust
cover tightly (Fig. 5).
4.2
Handle adjustment
The handle on this vacuum cleaner can be set to
one of three positions – upright, middle, or low.
To release the handle, step on the pedal at the
left rear corner of the vacuum cleaner
1. Middle position – for normal cleaning
2. Upright position – for when cleaning tools are
used or for storage. Handle locks in this
position.
3. Low position – for cleaning under furniture.
* Once in the middle position, step on the pedal
at the left rear corner of the vacuum and pull
back the handle again to place the vacuum to the
low position.
4.3
Using the hose and tools
When using the hose and tools please ensure the
handle is locked into the upright position and that
the brush head is tilted upwards to prevent the
brush running in place on the carpet.
The Valet Upright Vac is equipped with on-board
cleaning tools including telescopic wand, stretch
hose, dusting brush and a crevice tool.
1. Remove the extension wand from the body of
the vacuum cleaner and attach any tools
onto the end of the wand.
4.4
Edge cleaning feature
The edge cleaning feature provides improved
cleaning of carpets near walls and stationary
furniture. For maximum edge cleaning, use the
left side of the vacuum near walls or stationary
furniture.
5. Storage
•
After use check the bag.
If full, replace the bag.
•
Wind the supply cord
ensuring that the plug is
not trailing on the floor
(Fig 6).
•
Store the machine in a dry
indoor area only.
6. Maintenance
WARNING - Before undertaking
maintenance operations or
adjustments switch off machine and
unplug from the electricity supply.
The machine requires minimum maintenance
apart from the following checks by the operator.
•
Supply cord – Regularly inspect sheath, plug
and cord anchorage for damage or loose
connection.
•
Body of the machine – Clean with a damp
cloth.
Fig 2
Fig 3
Fig 4
Fig 5
Fig 6