TruTech TRCD688, User Manual

Page: 14 / 19

Using the unit controls:
1. During play, press either of the or buttons to select
the desired track number. The selected track will automatically
start to play.
Stop Play
1. Press BAND/STOP on the remote control or the unit. The
display will show the total number of tracks and total playing
time.
2. Press the OPEN/CLOSE button, to remove the CD from the
compartment.
Programmed Playback
Up to 20 tracks can be programmed for playback.
Using the remote control:
1. At stop mode press the PROG/MEM button. MEMORY will
flash on the display, the track number is shown on the left and
the program number on the right as below.
2. Use the or buttons to select the desired track number
to be played back first.
3. Press the PROGRAM/CLOCK button. The display will
increment the program playback number.
4. Use the or buttons to select the track number to be
played back second in the programmed sequence.
5. Press the PROGRAM/CLOCK button.
6. Repeat this process until you have entered all of the tracks
you wish to play back in the programmed sequence.
7. Press PLAY/PAUSE to start playback. Play back will start
with first track selected.
8. To stop playback press STOP/BAND.
9. Opening the CD door will clear program.
13