Radio
Operation
At the front of the CD micro system or using the remote
control, press POWER, to switch the CD micro system on. The
LCD display will light up.
Press either the TUNER button on the remote control or the
TUNER button on the unit to select the radio tuner.
Tuning
Press either BAND/STOP on the remote control or
BAND/STOP on the unit to select between FM and AM bands.
Use the tuning buttons on the remote control or on the unit to
select the desired station. The frequency will display on the LCD
display.
Pressing any of the tuning buttons briefly will change the
frequency by one increment. Pressing and holding the button for
a couple of seconds will cause the tuner to search for the next
radio station.
Pressing any of the tuning buttons during a search will stop the
search.
FM
FM Antenna
Fully extend the FM antenna wire and position it to obtain the
best FM reception.
FM Stereo
The CD micro system is capable of receiving stereo FM
broadcasts. When you tuned to a stereo broadcasting,
STEREO will be displayed.
AM
AM Loop Antenna
For AM reception broadcasts are picked up through a loop
antenna that plugs into the back of the unit.
The antenna assembly has a fixing system attached that can be
folded to form either a stand or wall mounting as shown in the
figures opposite. The wall mounting has two holes for round
head screws. These are not supplied.
9
Summary of Contents for TRCD688
Page 1: ......
