Operating
Instructions
Using the heater
Location
· Place the heater in an upright position on a firm, level, dry and heat-resistant floor surface, taking into considering all
relevant safety information on the previous pages. Avoid placement on carpets in order to prevent failure of the safety
switch.
· The heater is for floor-standing use only.· Ensure that there is sufficient distance from the wall, fixtures and other
appliances. The distance at the front must be at least 1m to exclude the risk of fire.
Connection
· plug the heater into an appropriate electrical outlet and
switch on power to the outlet.
· Always use a separate socket that has no other high wattage appliances connected at the same time - do not plug it into
apower board or socket adaptor; do not use an extension cord.
When turning on your heater for the first time,
it is normal for the heater to emit a 'new heater' smell,
which will quicklypass. This is no cause for concern.
Ensure good ventilation.
Setting the temperature
When
heating
starts,
you
can
use
the
[
+
]
and
[
- ]
button
to
set
the
temperature
you
want.
The
heater
will
turn
on
and
off
automatically
to
maintain
the
room's
temperature
at
this
set
level.
(For
example,
given
you
set
the
temperature
at
80
°F
the
heater
will
stop
working
when
the
temperature
reac
hes
80
°F
and
rework
when
the
temperature
is
lower
than
it)
Selecting a function
The function control has 5 buttons, as listedbelow:
Oscillation
Press the OCS button, open oscillation function, press again, stop oscillation function.
CAUTION
: Never attempt to adjust the swivelling mechanism manually, as it could damage the heater.
MODE
MODE
ON/OFF
OSC
TIMER
+
-
