9. Screw together the brake assembly
and insirt it into the frame again.
Disassembling the brake assembly
Let’s
Shop
Service Manual. Revision version
No: 1 – Nov 2019
2. Pull out the brake parts from the
brake wire guide.
4. The brake wire runs through the
brake wire guide.
1. When the brake assembly is out
start by removing all the screws.
3. Sepparate the fork from the
brake parts.
7. Left side, Wire first goes above (1)
before going around the plastic part.
8. Right side, Wire first goes above (1)
before going around the plastic part.
5. The brake wire is attached to the
brake parts like above.
6. if changing wire, remove the old one
and mount the new one correctly.
21. www.trustcare.se
ATTENTION
ATTENTION
