MANUAL DEL USUARIO
1
Información del producto
A: Panel principal
B: Pantalla
C: Base del iPod con conector
D: Conexión USB
E: Entrada auxiliar
F: Salida de vídeo
G: Entrada de alimentación
H: Antena de radio
I: Soportes
1
Conecte el adaptador de alimentación a la toma y a la entrada de alimentación del producto.
2
Presione “On/Off” en el panel principal o en el mando a distancia.
Reproducción o recarga del iPod mediante el conector
ES
3
Presione el soporte retráctil.
4
Seleccione el soporte que corresponda y colóquelo en la base.
5
Coloque el iPod en el soporte.
El modo de reproducción está establecido en “iPod” de manera predeterminada.
El iPod se cargará también cuando la estación esté apagada.
6
Puede desplazarse con los botones Arriba/Abajo, Siguiente/Anterior, Reproducir/Pausa, Enter y Menu, y
seleccionar las funciones del iPod.
Puede seguir usando los botones y la rueda del iPod, pero deberá controlar el volumen con el panel
principal o el mando a distancia.
Sincronización del iPod
7
Conecte el USB a la estación y al ordenador.
Puede que el ordenador detecte nuevo hardware. Espere hasta que el iPod esté totalmente
instalado.
8
Use el software iTunes para realizar la sincronización.
Encontrará ayuda, asistencia técnica y descargas gratuitas en www.apple.com/itunes.
El iPod puede sincronizarse aunque la estación esté apagada.
Uso de la radio FM/AM
9
Presione “FM” o “AM” en el mando a distancia o presione “Mode” en el panel principal 1 vez (FM) o 2
veces (AM).
El botón “Mode” del panel principal cambiará el modo de reproducción en la siguiente secuencia
circular:
iPod
→
FM
→
AM
→
Aux
10
Sintonización automática (la búsqueda se detendrá cuando se encuentre una estación de radio):
- Mando a distancia: mantenga pulsado 2 segundos “Tune +/-” O BIEN
- Panel principal: presione 1 vez “la tecla de v/-”. Sintonización manual (sintonizar o buscar
una frecuencia concreta):
- Mando a distancia: presione 1 vez “Tune +/-” para cambiar la frecuencia. Repita este paso cuando sea