Trust IPCAM-3000, User Manual

Page: 8 / 18

14 15
8 Wired usage
Before connecting the camera to your
modem/router make sure the camera is
connected with the App. (See step 6.1)
A
Mount the camera by following step 9. After
mounting guide the cables through the hole in
the wall inside the building like above picture.
B
Connect the camera using a network cable
from your router/modem to the network adapter
of the camera. Then connect the power adapter
to the power cable and insert the plug of the
power adapter into a wall socket.
9 Mount the Camera
Drill a hole in the wall where the cables can
run through. Place the mounting foot on a flat
surface and screw it tightly using the included
screws and plugs. Make sure the screw holes are
not placed in a crack or a hole.
7 Wireless usage
If the network cable is not used it can be
stored inside the foot of the IP camera.
A
Remove the foam from the bottom of the
foot.
B
Wrap the cable tightly around the foot of the
camera.
C
Guide the network cable through the notch
in the foot so it will not be pinched between the
wall and the camera when mounted.
D
Store the network connector inside the foot
and place the foam back.
Mount the camera by following step 9.
E
After mounting (See step 9) guide the reset
and power cable through the hole in the wall
inside the building like above picture. Then
connect the power adapter to the power cable
and insert the plug of the power adapter into a
wall socket.
IPCAM-3000 OUTDOOR CAMERA IPCAM-3000 OUTDOOR CAMERA
4
3
2
1
W
all
W
allW
all
A
B
D
C
E
B
A