Trust GeForce 256 32MB AGP
8
8.
Restart your computer.
You have now completed the installation of the driver. Continue to chapter 3.5 for the installation of DirectX7.
3.3 Installation of the driver in Windows NT4
Note:
You must have at least Service Pack 3 installed before you install the Trust GeForce 256 32MB
AGP.
1. Start Windows NT and log in as 'Administrator'.
2. Go to 'Start - Settings - Control Panel' and then double click on the 'Display' icon. Click on the 'Settings'
tab.
3. Click on 'Monitor' and then click on 'Change'.
4. Insert the CD-ROM with the drivers into your CD-ROM drive.
5. Click on 'Disk' and give the location as [D:\WinNT4]. Click on 'OK'.
6. Select the ‘Trust GeForce 256 32MB AGP’. Click on 'OK'.
7. Follow the on-screen instructions to complete the installation.
8. Restart your computer.
Your system is now ready for use.
3.4 Installation of the driver in Windows 2000
1.
Start Windows 2000 and log in as 'Administrator'.
2.
The new hardware will be detected. Click on 'Next' (see figure 10).
Figure 10: Automatic detection in Windows 2000
