Ami Mouse Combi / Scroll Pro
2
1. Introduction
This manual is meant for users of the Ami Mouse Combi and the Ami Mouse Scroll
Pro -Excellence Series-. When subjects are treated or described that do not apply to
both products, the manual will indicate as such.
No special knowledge is required for the installation and use of this product.
If you have any questions after reading this manual, please contact one of the
Trust service centres. You will find information on the service centre nearest to
you at the back of this manual. You can also visit the Trust website
(www.trust.com) for support, comprehensive product information, drivers, and
FAQ (Frequently Asked Questions) sheets.
The manual uses the following conventions:
‘Control panel’
A software term: is (usually) displayed on the screen.
<Enter>
A key that must be pressed on the keyboard.
[a:\setup]
A command that must be typed in by means of the
keyboard.
Important information will be shown as follows:
Note:
The disk may not be formatted.
2. Connecting
The packaging should contain the following items:
•
Ami
Mouse
•
Disk with driver
•
Converter plug
•
This
manual
Contact your dealer if any of the items are missing. Save the packaging in the event
that the Ami Mouse Scroll, must be transported.
2.1
Connecting to a PS/2 port
1.
Switch off the computer.
2.
Remove the old mouse (if present).
3.
Connect the Ami Mouse to the PS/2 port on the rear of your computer (if
necessary, use the converter plug).