TRUST AMI MOUSE 250SP WIRELESS OPTICAL
7
U K
Item
Name
Function
D
Right mouse button
Right mouse click.
E
Left side button
Programmable button.
F
Green indicator
Indicates a wireless connection.
G
Red indicator
Indicator for recharging the batteries.
Table 1: Explanation of the buttons
4.3 Software
1.
Double-click on the Trust icon in the taskbar (see figure 6).
2.
The mouse configuration window will appear (see figure 7).
3.
The scroll wheel mode can be selected in the ‘Scroll wheel’ tab.
4.
There are two options:
•
Increased scroll mode; has all the advantages of the MS-Intellimouse
and scrolls in Windows 95, Windows 98, Windows ME, Windows
2000, Windows XP and Windows NT4.
•
Intellimouse
mode; works as an MS-Intellimouse.
5.
Select the scroll wheel speed.
6.
Select the ‘Buttons’ tab. The buttons 3, 4 and 5 can be programmed in the
‘Buttons’ tab (see figure 8).
7.
Select a button and click on the arrow on the right-hand side. A drop-down
menu will appear (see figure 9).
8.
Select the function you wish to use.
9.
Click on ‘Apply’.
The mouse has now been programmed.
5
Selecting a new channel
You may wish to change the channel or to have the RF receiver and the mouse
detect each other again. If so, carry out the following:
1.
Select the desired channel on the RF receiver using the channel selection
switch (A) (see figure 2).
2.
Open the battery compartment on the mouse (A) and remove the batteries
(see figure 3).
3.
Select the same channel on the mouse as on the RF receiver using the
channel selection switch in the battery compartment.
4.
Reinsert the batteries and close the battery compartment.
5.
Press the detection button (B) on the bottom of the RF receiver (see figure
2).
6.
The green indicator (F) will start to flash (see figure 4).
7.
Next, press the detection button (B) on the bottom of the mouse (see figure
3).
8.
The green indicator on the RF receiver will start to flash more quickly and will
then stop flashing.
9.
The mouse is now ready for use again.
