TRUST WIRELESS ALARM SWITCH 200DS
3
5 Testing
For testing the magnetic contact, follow the instructions below:
1.
Make sure the house code is the same as the one of the movement detector
and the remote control.
2.
Push the magnetic contact’s ‘Panic’ button. If the alarm goes off the button
works properly.
3.
Set the alarm centre to the test mode, press [
your security code 4 numbers
]
[*] [
8
] on your keyboard.
4.
Interrupt the magnetic contact by opening the door or the window. If the alarm
centre beeps and the associated zone LED goes on, the magnetic contact
works properly.
5.
Press your [
your security code 4 numbers
] [*] [
8
] again to switch off the test
mode of the alarm centre.
For further information concerning installation and use of the magnetic contact,
consult the manual of your alarm centre.
