Bluetooth Audio Headset
- USER’S MANUAL
2
Installation
A
Previous
B
Next
C
USB power connection
D
Power button
E
Volume -
F
G
Bluetooth status LED:
Blue/ Red alternating
Pairing mode
Blue 1x every 2sec.
Connected.
Red Charging
H
USB charge cable
- Connect USB cable to headset and a USB port of your computer or laptop.
- The battery LED indicator will light red when charging.
- If the headset is fully charged the battery LED indicator will turn blue.
- Press and hold the power button on for 8sec until the LED light starts blinking blue & red alternating.
(paring mode).
To power off the headset. Press and hold the power button for 3sec.
If a passcode is requested during the configuration of the device Use
‘0000’.
The headset can also be used during charging.
Standard Configuration
iPad/
iPhone
- Go to ‘Settings’.
- Go to the ‘General’ settings.
- Go to ‘Bluetooth’.
- Make sure that Bluetooth is on.
- Select
‘Trust BT Headset’
in the list of Bluetooth devices (make sure the headset is in pairing mode).
When the device status is ‘paired’, your device is ready to use.
3
1
4
5
2
