Trust 15597, User Manual

Page: 25 / 100

En
gli
sh
User’s manual
1
Product information
A: On/Off button
B: Status LED
- AC power: Lit steady
- Battery power: Lit flash C: Phone/Modem out
D: Phone line in
E: AC input
F: Fuse holder G: Surge only output
H: Backup output
I: Loop through cables
i
Installation
PC off
Use power cable from PC to connect UPS to AC socket
Use loop through cable (I) to connect PC to UPS Backup output (H)
Device connected to Surge Only output (G) does not get UPS backup!
UPS least 20cm away from monitor!
UPS on
The UPS might be battery low due to its self-discharge characteristic; suggest to charge 8 hours before
using battery power!
PC on
Replacing fuse
UPS completely off
Use fuse of same rating (250V, 8A)!
(B) stores a backup fuse!
Open fuse holder
Replace a proper fuse at position A
Reminder
UPS is charged only when AC power is supplied and UPS is on!
Fully discharge then recharge the battery every 3 months for longer battery life!
Connect incoming analogue phone line to D; Connect a telephone or modem to C!
Backup time is related to the connected devices and battery condition!
UPS does not have dial-up function nor smart management like message alarm!
Conductive device, like laser printer, is suggested to connect to the Surge Only output!
2
1
3
4
6
5