Trust 140BM User Manual Download Page 7

TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM 

4.3 Connecting 

1. 

Connect the 6 Volt power adapter to the monitor (A and B, figure 1) and the 9 
Volt power adapter to the camera (E and F, figure 2). 

2. 

Switch the camera to channel 1 using switch H (see figure 2). 

3. 

Turn the camera on (On or Night) using the switch (G, figure 2). The voltage 
indicator (I, figure 2) will be lit.  

 

Note

:  

If you turn the camera on in the Night mode, the image displayed on 
the monitor (or a possible TV or video) will be black-and-white.

 

 
4. 

Turn the monitor on by rotating the PWR/VOL button (B, figure 3). Adjust the 
volume as required. A click will be heard and felt and the voltage indicator (E, 
figure 3) will be lit. 

5. 

Set the monitor to channel 1 by pressing the switch (F, figure 3) a number of 
times until the channel indicator (D, figure 3) is lit. You will now see the image 
detected by the camera. 

6. 

Adjust the brightness of the image as required using the brightness buttons 
on the monitor (G, figure 3). 

7. 

Optional: connect the Scart cable to the monitor and the VCR (C and D, figure 
1). The image detected by the camera can now be recorded. 

8. 

The security system is now operational. 

4.4 Extra 

functionality 

To save energy, this system has an Auto mode (C, figure 3). The monitor will be 
turned on if noise is detected by the microphone on the camera.  
 
1. 

Adjust the noise sensitivity level as required using the level button (A, figure 
3). 

Note

:  The noise sensitivity level can be adjusted from level 1 to level 9. Level 1 is 

the least sensitive and level 9 is the most sensitive.

 

2. 

Press the Auto button on the monitor (C, figure 3). The monitor will be turned 
off. 

3. 

When the noise detected by the microphone on the camera reaches the set 
sensitivity level, the monitor will turn on automatically.  

4. 

The monitor will turn off automatically as soon as the noise level drops below 
the set noise sensitivity level for an uninterrupted period of 1 minute. 

Note:

 

The Auto mode has no effect on the choice of channel.  

 

If you use the Auto mode, the image will still be transmitted via the 
monitor’s AV-out connection to a VCR or TV which may be connected 
to the scart connection.

 

4.5 

Positioning and use 

1. 

Use the attachment aids to attach the camera and/or the monitor to a wall, 
etc. (see figure 6). 

2. 

When positioning the camera, keep the wiring and the camera out of the 
reach of children and babies. 

4.6 Reception 

quality 

1. 

The reception from the camera depends on the number of walls, doors, floors, 
ceilings, etc. between the monitor and the camera. Metal and constructions 
containing metal can also considerably reduce the range and quality of the 

Summary of Contents for 140BM













Reviews: