Trust 140BM User Manual Download Page 10

TRUST 140BM LCD WIRELESS OBSERVATION SYSTEM 

6 Specifications 

6.1 Wireless 

range 

U K

The system has been tested in the open field using both power adapters (not with the 
batteries). The maximum distance at which the image and sound signals are still 
acceptable is 100 m. 
 
The system has been tested indoors using both power adapters (not with the 
batteries). The signals can be transmitted a distance of 20 metres with only one 
concrete floor (no walls, etc.) between the camera and the monitor. 
 
In the Night mode, the camera can record clear images in an unlit area up to a 
distance of 2.5 metres. 
 
The system has been tested with rechargeable 1800 mAh NiMH batteries. The 
monitor will work for approximately 4 hours in the Normal mode with maximum 
brightness. The camera will work for 8 hours in the Night mode. The distance 
between the camera and the monitor was 10 metres. 

Note:

 

Depending on the circumstances in which the camera and monitor are 
used, the measured distances and times are no guarantee for this 
device. 

6.2 Technical 

information 

The table below gives the technical specifications for the monitor and the camera. 

Description Response 
Wireless technology [RF, IR, … + 
frequency] 

RF / 2.434 ~ 2.473 GHz 

Frequency per channel [GHz] [1 / 2 / 3] 

2.434 / 2.453 / 2.473 

Optical module [CCD / CMOS / ...]  

CMOS 1/3” 

A/V modulation/demodulation method 

FM 

Lens viewing angle 

45° 

Lens focal distance 

f 6.0 mm, F1.8 

Monitor screen size 

1.5 inch 

Number of pixels for the monitor 

117,600 pixels 

Monitor screen type 

Colour 
100 m in free space using the 
power adapter provided. 

Maximum wireless distance between the 
camera and the monitor (metres) 

20 m in a closed space with a 
maximum of 1 obstacle using the 
power adapter provided. 

RF approval no. (CE xxxx !) 

CE0678   

Other outputs 

A/V out on monitor 

Camera resolution ... x ... 

PAL: 628 (H) x 582(V) 

Power supply 

Monitor: JAD0600600E Input 
230VAC 50 Hz / Output 6VDC 
600mAh 

Summary of Contents for 140BM













Reviews: