background image

TRUST 120V WIRELESS DVD & VIDEO VIEWER 

If there is a fault, return the product to your dealer and include an explanation 
of the fault, the proof of purchase and all the accessories. 

During the warranty period, you will receive a similar model, if one is available. 
If no similar product is available, your product will be repaired. 

Please contact our help desk for missing components, such as the instruction 
manual, software or other components. 

The warranty becomes invalid if the product has been opened, if there is 
mechanical damage, if the product has been misused, if alterations have been 
made to the product, if the product has been repaired by a third party, in the 
case of negligence or if the product has been used for a purpose other than 
that originally intended.  

Excluded from the warranty:  

 

• 

Damage caused by accidents or disasters, such as fire, flood, 
earthquakes, war, vandalism or theft. 

• 

Incompatibility with other hardware/software which is not stated in the 
minimum system requirements. 

• 

Accessories, such as batteries, fuses (if applicable). 

Under no circumstances will the manufacturer be held responsible for any 
incidental or consequential damage, including the loss of income or other 
commercial losses resulting from the use of this product.  

Summary of Contents for 13814







Reviews: