TRUST 2 PORT USB 2.0 PCI CARD
2
3.2
Uninstalling old drivers and devices
The most common cause of faults during installation is the presence of a driver for a
similar, old product. The best solution is to first remove all drivers related to old
devices before installing the new driver.
1.
Enter the Windows ‘Safe Mode’ (press F8 when starting Windows and then
select ‘Safe Mode’ from the menu which is displayed).
2.
Click on ‘Start – Settings – Control Panel’ and double-click on the
‘Add/Remove Programs’ icon.
3.
Find all the programs for similar, old devices and remove these by clicking on
the ‘Add/Remove’ button. When in the ‘Safe Mode’, it is possible for some
programs to appear twice. In that case, remove all the programs which
appear twice.
4.
Restart the computer.
3.3
Installing the driver in Windows 98 / Windows 98 SE /
Windows ME / Windows 2000 / Windows XP
Note:
First remove the drivers for your current USB 2.0 card (if present).
Note:
The latest drivers can be downloaded from www.trust.com/13351. Check
whether a new driver is available and use this for the installation.
Note:
Make sure all other programs are closed during the installation.
Note:
During installation in Windows XP, you may receive a message saying
that the driver has not been signed. This does not cause a problem for
the functionality.
1.
Insert the TRUST Installation CD-ROM into your CD-ROM drive. Figure 2 will
appear.
2.
Click on 2 Port USB 2.0 PCI card. Figure 3 will appear.
3.
Click on 'Next' to continue. Figure 4 will appear.
4.
Select ‘Install USB 2.0 Driver’ and click on ‘Next’ to continue.
5.
Figure 5 will appear after the installation has been completed. Select ‘Yes I
want to restart my computer now’ to restart your computer.
You have now completed the installation of the driver. Continue to chapter 3.4 for
instructions on how to install the TRUST 2 PORT USB 2.0 PCI Card.
3.4
Installing the USB card
1.
Close Windows and turn off the computer.
2.
Remove the power cable from the mains supply.
3.
Open the computer casing as described in the instruction manual provided
with your computer.
4.
Find a free PCI slot (white).
5.
Remove the plate from the slot.
6.
Remove the TRUST 2 PORT USB 2.0 PCI CARD from the antistatic
packaging.
7.
Insert the TRUST 2 PORT USB 2.0 PCI CARD into the PCI slot. Press the
card firmly into the slot so that it makes good contact. Screw the card firmly
into place (see figure 6).
8.
Close the computer casing and connect the power cable to the computer’s
power connection.
