background image

   

       Use care when using the tool in the presence of combustible materials. Do not apply in the same place for 

long periods of time. Do not use in the presence of explosive atmospheres. Bear in mind that some combustible materials 

may conduct heat and not being evident at first glance. Set the tool into the base after using and give it time to cool down 

before storing. Do not leave the appliance unattended when is being used.

5

• Take your time assessing the job. Double check all 

necessary cautions are met before operating the heat gun. 

                             • Wear gloves and use them during the 

job to protect hands from high temperatures coming out 

off the heat gun.  Otherwise, the user is exposed to severe 

burns.

                             • If using the heat gun to remove paint, 

wear a breathing mask with filter to prevent breathing in 

toxic fumes.  Keep the area well ventilated when working 

indoors.

Before operating the heat gun

   

      • Double check the switch is in the OFF 

position (see page 7, turning on and operation control 

section) before plugging the tool. Otherwise, it can have an 

accidental start up causing severe injuries or fire.   

                         • Never aim the gun when is ON towards 

people or animals. Keep passersby away from the work 

area.

                            • Hold the gun by the handle, NEVER by 

the air outlet. Otherwise, the user is exposed to severe 

burns.

                          • Wait until the air outlet cools down 

completely before setting or changing accessories.

                          • When pausing the job, use the orifice in 

the handle to hang the gun (

A

) or to support it on a flat, 

firm and stable surface (

B

) away from any object, material 

or body part to prevent an accident.

While operating the heat gun

   

       • Wait until the gun completely cools 

down before storing it in a safe place away from the reach 

of children.

After operating the heat gun

   

       • Do not try to thaw plastic pipes. The 

material would hopelessly get ruined needing to be 

replaced.

Contraindications

A

B

CAUTION

CAUTION

CAUTION

CAUTION

DANGER

DANGER

WARNING

WARNING

WARNING

Safety Warnings

for Heat Guns

There is risk of fire if the tool is not used carefully, therefore:

CAUTION

ENGLISH

Summary of Contents for 17279





















Reviews: