9
ENGLISH
If the problems persist despite carrying out the recommended corrective actions,
contact a Authorized Service Center.
Maintenance
Troubleshooting
• Inspect regularly all the mounting screws and double
check they are correctly tightened. If any of the screws is
loose, tighten immediately.
Cleaning and Care
• Repairs to the equipment shall only be carried out in a
Authorized Service Center
Service and maintenance carried out by non-qualified
persons may be dangerous and could cause personal
injuries and makes the product warranty void.
Repairs
• Set the pump automatic selector in automatic
mode (II) or manual (III).
• Check the fuses and power line.
• Remove the purge screw and turn the axis with
a screwdriver.
• Run the pump some minutes with the faucet
opened and discharge air.
• Change to off mode (I) or automatic (II) mode.
• Open the valve.
• Open the valve.
• Run the pump a few minutes with an open
faucet and discharge air.
• Go to a Authorized Service
Center.
The pump is not
running.
The pump is making
noise.
The pump does not
stop when the faucet
is closed.
The pump is
functioning but is not
generating pressure.
• The pump is off.
• Problems in the power supply.
• The motor axis is stuck.
• There is air in the system or in the pump.
• The pump remote selector in is manual
mode.
• The flow sensor is dirty.
• The valve is closed.
• There is air in the pipe or the pump.
• The pump is dirty. The flow sensor is blocked
with foreign objects.
Problem
Cause
Solution
