10
ENGLISH
• Fasten all the screws.
• Go to a Authorized Service
Center to replace the parts.
• Regulate the air feeding pressure.
• Lubricate following instructions indicated in this
manual.
• Go to a Authorized Service
Center to replace the parts.
• Fasten all the screws.
• Go to a Authorized Service
Center to replace the parts.
• Check the nails have the right size.
• Replace with nailers in good repair.
• Fasten the screws.
• Clean the cartridge.
• Go to a Authorized Service
Center to replace the parts.
• Go to a Authorized Service
Center to replace the parts.
Air leak in the upper
side of the tool or in
the trigger area.
The tool is not
operating or goes to
slow.
Leak in the lower
side of the tool.
The tool gets blocked
frequently.
Other problems.
• Loose screws.
• Worn ”O”-rings or damaged seals.
• Inadequate air supply.
• Inadequate lubrication.
• Worn ”O”-rings or damaged seals.
• Loose screws.
• Worn ”O”-rings or damaged seals.
• Wrong nails.
• Damaged nails.
• Loose cartridge or nozzle screw.
• Dirty cartridge.
• The shooting mechanism is damaged or worn.
• Diverse reasons.
Problem
Cause
Solution
Notes
Troubleshooting
