• Use a template (
A
) between the router base (
B
) and the
workpiece (
C
).
• Rest the copying guide bushing (
D
) on the edge of the
template.
• Make the cut without separating the bushing around the
perimeter of the template (
E
).
Copying guide
• Rest the edge guide roller (
F
) on the edge of the
workpiece (
G
).
• Make the cut without separating the roller around the
perimeter of the workpiece.
• Before cutting,
test a scrap piece to determine the
position of the roller. Tighten the
knobs before cutting.
Edge guide
• Drill bits with built-in stops are ideal for working edges.
The workpiece itself can serve as a guide when its
thickness is greater than the height of the drill bit (
I
). If the
thickness of the work piece is less than the height of the
drill bit, use a guide (
K
) to make the cut.
A
B
A
E
C
G
D
F
D
F
I
K
Operation
13
Drill bits with guide stop
ENGLISH
CAUTION
